Brand:
Wilson Combat
Product Code:
399B,80
A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a factory firing pin stop.
A quality firing pin stop should fit snugly in place, therefore this part does require minor fittin..
39.00€
Brand:
Wilson Combat
Product Code:
851L-BLK
Factory Replacement Backstrap for the EDC X9 defensive handgun.
Adds approximately .100” to grip diameter for larger handed shooters.
User replaceable with no fitting required.
7075-T6 Aluminum construction with black hard anodized finish...
149.00€
Brand:
Wilson Combat
Product Code:
WC-588
Wilson Combat Bullet Proof® Barrel Bushings are produced from top-quality stainless steel for maximum reliability and wear. This Stainless Steel bushing is a gunsmith part with considerably more material on the O.D. and I.D. for use with smaller barrels or when special situations require additional ..
55.90€
Brand:
NightHawk Custom
Product Code:
SP0403
It’s a good idea to change your firing pin spring every 5,000 rounds to insure proper ignition and have enough tension on the firing pin for safety reasons.An extra power spring is a safety feature to have in your 1911 in case of an accidental drop. The double extra power spring is recommended when ..
4.90€
Brand:
Wilson Combat
Product Code:
614G17
Recommended Use: Full-Size 5" .45 ACP shooting 230 gr. hardball equivalent or standard pressure JHP self-defense ammunition with a power factor of 175,000 to 195,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 40,000 Rounds
The longest lasting handgun recoil spring made - our ..
24.90€
Brand:
NightHawk Custom
Product Code:
SP0352-M
Our new Tool Steel Slide Stop is cut from solid bar stock and hardened to insure a lifetime of flawless performance. This fully machined part is unrivaled in the 1911 world because of the quality of machining and the close tolerances it is held to during the machining process.Part Number: SP0352..
92.00€
Brand:
Wilson Combat
Product Code:
10G18
Recommended Use: Full-Size 5" 10mm shooting target ammunition or .45 ACP shooting 230 gr. hardball equivalent or standard pressure JHP self-defense ammunition with a power factor of 175,000 to 195,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 2,000 Roun..
14.90€
Brand:
NightHawk Custom
Product Code:
SP0299
NightHawk complete pin set complete with mainspring caps and pins. Available in Government and Officer size.Part Number: SP0299..
33.00€
Brand:
NightHawk Custom
Product Code:
SP0075
Our Disconnector is the same one we use on all of our custom 1911s. It is an integral part of a great trigger job, and paramount to the safety of the firearm. CNC machined from billet and hardened to maintain its integrity and provide you the part you need to build the perfect 1911. *Gunsmith f..
55.00€
Brand:
Wilson Combat
Product Code:
R20
These 1911 Auto parts meet or exceed factory specifications. If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service...
4.90€
Brand:
Wilson Combat
Product Code:
10G17
Recommended Use: Full-Size 5" .45 ACP shooting 185 gr. / 200 gr. standard pressure target or JHP self-defense ammunition with a power factor of 160,000 to 175,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 3,000 RoundsWilson Combat Heavy-Duty Recoil..
14.90€
Brand:
NightHawk Custom
Product Code:
SP0401
This is a spring kit that that will come in handy. It has two standard recoil springs, an extra power spring for +P, a reduced power hammer spring, and an extra power firing pin spring. Part Number: SP0401..
33.00€
Brand:
Wilson Combat
Product Code:
573
Machined from tough alloy billet steel for a lifetime of function and wear resistance, this disconnector has been engineered to provide flawless function, enable light trigger pulls and to reduce drag on the slide.
Works best with our Bullet Proof® Ultralight hammers and deluxe Bullet Proof® Sear (..
55.00€
Brand:
Wilson Combat
Product Code:
R33PS
These 1911 Auto parts meet or exceed factory specifications. If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service...
4.90€
Brand:
NightHawk Custom
Product Code:
NH-SP0090
Precisely sized to prevent primer flow. Available in 45 acp or 38/9mm. (Nighthawk Custom® guns use the 38/9mm.)Part Number: SP0090..
22.90€
Brand:
Wilson Combat
Product Code:
25G
The One Piece Full-Length Guide Rod will make your 1911 operate and cycle smoother.
Extends Recoil Spring Life
Improves Cycling and Overall Operation
Extends Life of Slide to Frame Fit
Can Improve Barrel to Slide Fit and Accuracy on Older Military 1911s
The One Piece Full Length Guide R..
49.00€
Brand:
NightHawk Custom
Product Code:
SP0404
On most Government (5") size guns, we suggest you use a 17# to 18.5# spring for standard factory ammunition (2,000 rounds). If you plan on having an extended shooting session using hot or +P ammo, then opt for the 20# spring. It works well on ammunition like Winchester Lawman. If you want to shoot s..
12.00€
Brand:
NightHawk Custom
Product Code:
SP0399
This is a spring kit that that will come in handy. It has two standard recoil springs, an extra power spring for +P, a reduced power hammer spring, and an extra power firing pin spring. Part Number: SP0399..
32.90€
Brand:
NightHawk Custom
Product Code:
SP0210
CNC machined from bar stock, it has a generous radius already incorporated where it rests proportionately into the mainspring housing cap pin.*Gunsmith fit requiredPart Number: SP0210..
31.00€
Brand:
Wilson Combat
Product Code:
684S
Standard thickness grip screw bushings are a direct replacement for one that is damaged or stripped during use.Note: Most factory installed bushings require removal of rear staking for new bushing installation. Re-staking or loctite 271 are acceptable ways to secure your new b..
19.00€
Brand:
Wilson Combat
Product Code:
R5S
These 1911 Auto parts meet or exceed factory specifications. If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service...
4.90€
Brand:
NightHawk Custom
Product Code:
SP0350-1
The heart of a trigger job is the sear. Our sear is cut from solid bar stock, not cast, and is fully machined and hardened. It requires qualified gunsmith installation.*Gunsmith fitting required.Part Number: SP0350-1..
52.00€
Brand:
NightHawk Custom
Product Code:
SP0300
NightHawk complete pin set complete with mainspring caps and pins. Available in Government and Officer size. Part Number: SP0300..
23.00€
Brand:
Wilson Combat
Product Code:
R36S-SH
This is the appropriate ejector pin for 34W and 34WS (Wilson Combat Bullet Proof Ejector) This is the standard pin for a Wilson Combat handgun with a serial number prefix WCT...
7.90€