The DDM4 V7 SLW AR15 style rifle is one of the lightest, fastest-handling rifles available in the DDM4 line-up, tipping the scales at under 6 lbs. Built around a Cold Hammer Forged, 14.5 inch Lightweight profile barrel, the V7 SLW has an Extended Flash Suppressor which is pinned and welded to reach the NFA required 16 inch minimum barrel length.
The mid-length gas system provides smooth and reliable cycling under any conditions and reduces both perceived recoil and wear on moving parts. A free-floating MFR 13.5 M-LOK handguard offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense
With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7S has plenty of room for sights, optics, and accessories the user may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
MATERIALS & CONSTRUCTION
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5" Government Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Mid-Length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: MFR 13.5, CNC Machined of 6061-T6 Aluminum, Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- Made in the USA!
| Product Specs | |
| Action | Semi Auto |
| Barrel Length | 14.5" |
| Capacity | MULTI |
| Color | Black |
| Finish | Available in: Black anodized |
| Front Sight | N/A |
| Gas System | Direct Impingement |
| Overall Length Collapsed | 31 1/2” – 34 ¾” |
| Overall Length Extended | N/A |
| Rear Sight | N/A |
| Rifle Lower | CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized |
| Rifle Upper | CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized |
| Special Purpose | Carbine |
| Weight | 5.9 lbs / 2.67kg |
Daniel Defense
Daniel Defense is a family owned and privately held firearms manufacturer located in Black Creek, Georgia. Founded in 2000 by Founder & Executive Chairman Marty Daniel, the company was born from Marty’s vision to create custom rifle accessories for his personal rifles. Eighteen years later, Daniel’s concepts have evolved into one of the most recognizable brands in the firearms world, consisting of the world’s finest AR15-style rifles, pistols, bolt-action rifles, and accessories for civilian, law enforcement, and military customers. At Daniel Defense, we celebrate the liberty of our country, the enthusiasm of our customers and employees, and the quality and accuracy of our products.
