-776x776.jpg "POF Renegade Plus Upper Assembly")
Renegade Plus Upper: When we decided to make a direct impingement rifle, it couldn’t be another “me-too” carbine. The Renegade Plus Upper embodies everything a direct impingement AR-15 can be. With improvements such as our roller cam pin and patented heat sink barrel nut, these upgrades go well above mere aesthetics often found in rifles today.
Put simply, the Renegade + addresses all of the weak points of the direct impingement system. The Dictator 9-position adjustable gas block gives you ultimate control of your rifle, whether tuning for ammo load or suppressor use. The straight gas tube eliminates heat build up from the weak points of standard gas tubes. And the roller cam pin ensures a smooth and more reliable relationship with the upper receiver.
Chambered in 5.56 NATO, all Renegade + uppers are available in Black, Tungsten, and Burnt Bronze finishes.
Available barrel lengths are 10.5", 12.5", 13.75", 14.5", 16.5" and 18.5"
E2 DUAL-EXTRACTION TECHNOLOGY | |
POF’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear.
|
ADJUSTABLE GAS SYSTEM | |
| |
The POF adjustable gas system consists of three major components, the gas plug, gas piston and operating rod. Residual gasses behind the bullet are routed into the gas block which drives both the piston and the op rod rearward in turn cycling the firearm. Suppressors add back pressure to a firearms operating system and thus increase bolt speed. This causes premature wear on the firearm and can even result in the bolt catching the discharged casing also known as “stove piping”. The POF gas system allows the user to restrict, and even shut off, this extra back pressure by simply rotating the gas plug. | |
NITRIDE HEAT-TREATED BARREL & 3 PORT MUZZLE BRAKE | |
NITRIDE HEAT-TREATED BARRELEvery shooter knows that the beating heart of their rifle is their barrel. Our match-grade chrome-moly barrels are 5R button rifled with polygonal rifling for extreme accuracy and an incredible boost to bullet velocity compared to mil-spec AR barrels. We then finish our barrels with a Nitride Heat Treatment to Rockwell 70 hardness for unsurpassed strength, heat and corrosion resilience, and an average lifespan well into the tens of thousands of rounds. There is no better barrel on the market. | TRIPLE PORT MUZZLE BRAKEDesigned to precisely compliment the POF-USA platform; our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut. |
OVERSIZED HEAT SINK BARREL NUT | |
| |
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. The barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. The enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly. | |
BOLT CARRIER GROUP & ROLLER CAM PIN | |
BOLT CARRIER GROUPOur one piece high-phosphorus nickel coated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. Our bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action. | Roller Cam PinThe patented roller cam pin is just one more example of how POF strives to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.
|
ANTI-TILT BUFFER TUBE | |
| |
| The mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes. | |
FIND OUT MORE ABOUT PATRIOT ORDNANCE FACTORY | ||
| ||
| Product Specs | |
| Action | Semi Auto |
| Barrel Length | 10.5", 12.5", 13.75", 14.5", 16.5" and 18.5" |
| Capacity | MULTI |
| Color | Black |
| Finish | Available in: Black anodized / NP3 / Burnt bronze / tungsten |
| Front Sight | N/A |
| Gas System | Piston |
| Overall Length Collapsed | N/A |
| Overall Length Extended | N/A |
| Rear Sight | N/A |
| Rifle Lower | Billet Steel |
| Rifle Upper | Billet Steel |
| Special Purpose | Carbine |
| Weight | N/A |
POF USA
Patriot Ordnance Factory (POF-USA) manufactures and distributes law enforcement, military and civilian rifles in Phoenix, Arizona, and was the first manufacturer and seller of gas-piston-operated weapon systems on AR-style rifles in the United States. POF-USA was founded in 2002 by aerospace engineer Frank DeSomma with the intent of solving the most common problems with gas impingement AR15 systems. The company now holds numerous patents and awards for their products.
