The P415 was designed over 15 years ago to be unstoppable in all environments. It is a product of constant development and design improvement. It's reliability has been tested time after time, and the operating system has been perfected. With the development of our E2 Extraction Technology, complete ambidextrous fire controls, free floating rail platform, and numerous other improvements the P415 Edge is the pinnacle of all Modern sporting rifles. To reduce weight and increase shooter comfort, our P415 edge upper features the an all new handguard, reducing the size by nearly 20%. As a result, we have made the width a mere 1.75 inches. Not only did we drop the weight of the platform, we also provided better ergonomics for the shooter.
Chambered in 5.56 NATO, all P415 Edge uppers are available in Black, Tungsten, and Burnt Bronze finishes.
Available barrel lengths are 10.5", 12.5", 14.5", 16.5" and 18.5"
E2 DUAL-EXTRACTION TECHNOLOGY | |
POF’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear.
|
ADJUSTABLE GAS SYSTEM | |
| |
The POF adjustable gas system consists of three major components, the gas plug, gas piston and operating rod. Residual gasses behind the bullet are routed into the gas block which drives both the piston and the op rod rearward in turn cycling the firearm. Suppressors add back pressure to a firearms operating system and thus increase bolt speed. This causes premature wear on the firearm and can even result in the bolt catching the discharged casing also known as “stove piping”. The POF gas system allows the user to restrict, and even shut off, this extra back pressure by simply rotating the gas plug. | |
MODULAR RAILED RECEIVER | |
| |
The patented Modular Railed Receiver (M.R.R) is POF’s crown jewel for precision and extreme rigidity. This is a two piece upper assembly with a free-floating monolithic handguard that slides on and interfaces directly to the upper assembly thanks to our upper’s reinforced backbone. This backbone is five-times thicker than standard flattop platforms. The suspended handguard keeps your grip and accessories from weighing on the barrel and with the help of our wedge block, reduces stress and flex in the barrel extension area. This ensures both extreme rigidity and accuracy by directing stress risers toward the upper assembly’s strongest, most reinforced materials. | |
NITRIDE HEAT-TREATED BARREL & 3 PORT MUZZLE BRAKE | |
NITRIDE HEAT-TREATED BARRELEvery shooter knows that the beating heart of their rifle is their barrel. Our match-grade chrome-moly barrels are 5R button rifled with polygonal rifling for extreme accuracy and an incredible boost to bullet velocity compared to mil-spec AR barrels. We then finish our barrels with a Nitride Heat Treatment to Rockwell 70 hardness for unsurpassed strength, heat and corrosion resilience, and an average lifespan well into the tens of thousands of rounds. There is no better barrel on the market. | TRIPLE PORT MUZZLE BRAKEDesigned to precisely compliment the POF-USA platform; our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut. |
OVERSIZED HEAT SINK BARREL NUT | |
| |
The patented oversized heat sink barrel nut is one of the most significant innovations. At three inches long it completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. The barrel nut’s 3” length also gives the operating rod substantial guiding surface assuring constant positive contact with the bolt carrier. The enhanced backbone receiver also move the upper’s natural stress point forward. This adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly. | |
BOLT CARRIER GROUP & ROLLER CAM PIN | |
BOLT CARRIER GROUPOur one piece high-phosphorus nickel coated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. Our bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action. | Roller Cam PinThe patented roller cam pin is just one more example of how POF strives to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.
|
ANTI-TILT BUFFER TUBE | |
| |
| The mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes. | |
FIND OUT MORE ABOUT PATRIOT ORDNANCE FACTORY | ||
| ||
| Product Specs | |
| Action | Semi Auto |
| Barrel Length | 10.5", 12.5", 14.5", 16.5" and 18.5" |
| Capacity | MULTI |
| Color | Black |
| Finish | Available in: Black anodized / NP3 / Burnt bronze / tungsten |
| Front Sight | N/A |
| Gas System | Piston |
| Overall Length Collapsed | N/A |
| Overall Length Extended | N/A |
| Rear Sight | N/A |
| Rifle Lower | Billet Steel |
| Rifle Upper | Billet Steel |
| Special Purpose | Carbine |
| Weight | N/A |
POF USA
Patriot Ordnance Factory (POF-USA) manufactures and distributes law enforcement, military and civilian rifles in Phoenix, Arizona, and was the first manufacturer and seller of gas-piston-operated weapon systems on AR-style rifles in the United States. POF-USA was founded in 2002 by aerospace engineer Frank DeSomma with the intent of solving the most common problems with gas impingement AR15 systems. The company now holds numerous patents and awards for their products.
