Brand:
Wilson Combat
Product Code:
659S
The ultimate thumb safety for your carry gun, the Wilson Combat Tactical Bullet Proof® thumb safety is perfectly shaped for everyday use and precision machined from a solid block of hardened billet steel. The safety shaft is cut to maximum dimensions for a snug fit in even the most oversize 19..
121.90€
Brand:
Wilson Combat
Product Code:
738-FS-BB-GB
Wilson Combat aggressive Starburst pattern 1911 handgun grip panels are designed to provide you with superior grip and comfort in any situation. With an aggressive starburst pattern, these G-10 composite panels feature a beveled bottom which is specifically designed for handguns that don't have a ma..
99.00€
![Wilson Combat Recoil Spring, 5" Full-Size, 13 Lb.](https://www.talosdefense.com/image/cache/catalog/products/1/0/10g17_1_1_1-20x20.jpg "Wilson Combat Recoil Spring, 5" Full-Size, 13 Lb."){kind=small}
![Wilson Combat Recoil Spring, 5" Full-Size, 13 Lb.](https://www.talosdefense.com/image/cache/catalog/products/1/0/10g17_1_1_1-496x496.jpg "Wilson Combat Recoil Spring, 5" Full-Size, 13 Lb.")
![Wilson Combat Recoil Spring, 5" Full-Size, 13 Lb.](https://www.talosdefense.com/image/cache/catalog/products/w/i/wilson-combat-logo_1_1_1_1-496x496.jpg "Wilson Combat Recoil Spring, 5" Full-Size, 13 Lb."){kind=logo}
Brand:
Wilson Combat
Product Code:
10G13
Recommended Use: Full-Size 5" 9mm +P or .38 Super shooting full charge target or self-defense ammunition or .45 ACP shooting target ammunition with a power factor of 130,000 to 150,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 4,000 Round..
14.90€
Brand:
Wilson Combat
Product Code:
399B,70
A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a factory firing pin stop.
A quality firing pin stop should fit snugly in place, therefore this part does require minor fittin..
39.00€
Brand:
Wilson Combat
Product Code:
614G20
Recommended Use: Full-Size 5" 10mm shooting target ammunition or .45 ACP shooting +P JHP self-defense ammunition with a power factor of 180,000 to 200,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 40,000 RoundsThe longest lasting handgun recoil spring m..
24.90€
Brand:
Wilson Combat
Product Code:
846MS
Recommended Use: EDC X9NOTE: This is the hammer spring we install in our EDC X9 pistols...
6.90€
Brand:
Wilson Combat
Product Code:
415-70S
When it comes to the reliability of a 1911, the extractor is the most critical component of your handgun. A well-designed, properly tuned εξολκέας ensures that your pistol feeds, extracts, and ejects reliably every time.All Wilson Combat Bullet Proof® extractors are machined from solid bar stock all..
65.00€
Brand:
Wilson Combat
Product Code:
758CK
The Wilson Combat Beretta 92 Chrome Silicon Competition rated spring kit will enhance all aspects of the performance of your Beretta 92 pistol with the most durable, longest lasting gun springs on the market. The Competition Kit is tuned for standard velocity loads and the reduced power hammer ..
39.90€
Brand:
Wilson Combat
Product Code:
856
Wilson Combat replacement EDC9/EDC X9 / SFX9 extractor pin & springThis .050” hex head pin retains the EDC 9/EDC X9 spring loaded external extractor and is threaded into the slide to lock the extractor into place.This threaded pin is a good spare part to keep in case of loss or breaka..
4.00€
Brand:
Wilson Combat
Product Code:
684B
Standard thickness grip screw bushings are a direct replacement for one that is damaged or stripped during use.Note: Most factory installed bushings require removal of rear staking for new bushing installation. Re-staking or loctite 271 are acceptable ways to secure your new b..
19.90€
Brand:
Wilson Combat
Product Code:
959
Wilson Combat/Mec-Gar 18 round factory replacement extended magazine for the Wilson Combat EDC X9 and eXperior Double Stack 9mm Defensive Handgun.Tempered steel tube treated with a black, anti-friction coating ensures drop-free operation and smooth feeding in extreme duty environments. Enhanced spri..
89.00€
Brand:
Wilson Combat
Product Code:
R10,38
These 1911 Auto parts meet or exceed factory specifications. If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service.
Made to the upper end of tip diameter specifications (.0685" to .0695") to improve ignition and prevent primer flow from high..
26.90€
Brand:
Wilson Combat
Product Code:
WC-34SS
A combat pistol must reliably eject spent cases every time. Wilson Combat Extended Combat Ejectors are designed to give optimal case clearance and endure the constant pounding of even the hottest loads. These Ejectors are fully machined from 4130 bar stock and heat treated for maximum durability. If..
59.90€
Brand:
Wilson Combat
Product Code:
399B,80
A Bullet Proof firing pin stop is fully machined from super tough bar stock steel with great care to radius all corners resulting in a part that is many times stronger than a factory firing pin stop.
A quality firing pin stop should fit snugly in place, therefore this part does require minor fittin..
39.00€
Brand:
Wilson Combat
Product Code:
851L-BLK
Factory Replacement Backstrap for the EDC X9 defensive handgun.
Adds approximately .100” to grip diameter for larger handed shooters.
User replaceable with no fitting required.
7075-T6 Aluminum construction with black hard anodized finish...
149.00€
Brand:
Wilson Combat
Product Code:
WC-588
Wilson Combat Bullet Proof® Barrel Bushings are produced from top-quality stainless steel for maximum reliability and wear. This Stainless Steel bushing is a gunsmith part with considerably more material on the O.D. and I.D. for use with smaller barrels or when special situations require additional ..
55.90€
Brand:
Wilson Combat
Product Code:
614G17
Recommended Use: Full-Size 5" .45 ACP shooting 230 gr. hardball equivalent or standard pressure JHP self-defense ammunition with a power factor of 175,000 to 195,000 (Velocity x Bullet Weight = Power Factor)
Average Service Life: 40,000 Rounds
The longest lasting handgun recoil spring made - our ..
24.90€
Brand:
Wilson Combat
Product Code:
500-9C9B
Introducing The Wilson Combat Next Generation ETM-9mm 1911 magazines-Now Completely Redesigned for Enhanced ReliabilityIn the quest for flawless magazine function across a wide variety of custom and production handguns Bill Wilson has redesigned our Elite Tactical 9mm 1911 magazines to feed more smo..
69.00€
Brand:
Wilson Combat
Product Code:
10G18
Recommended Use: Full-Size 5" 10mm shooting target ammunition or .45 ACP shooting 230 gr. hardball equivalent or standard pressure JHP self-defense ammunition with a power factor of 175,000 to 195,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 2,000 Roun..
14.90€
Brand:
Wilson Combat
Product Code:
R20
These 1911 Auto parts meet or exceed factory specifications. If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service...
4.90€
Brand:
Wilson Combat
Product Code:
10G17
Recommended Use: Full-Size 5" .45 ACP shooting 185 gr. / 200 gr. standard pressure target or JHP self-defense ammunition with a power factor of 160,000 to 175,000 (Velocity x Bullet Weight = Power Factor)Average Service Life: 3,000 RoundsWilson Combat Heavy-Duty Recoil..
14.90€
Brand:
Wilson Combat
Product Code:
320-SR
This unique part, designed by Wilson Combat engineers replaces the small and hard to reach factory P320 lo-profile slide catch levers.
Stamped from high quality ordnance steel, the deeply grooved and extended Wilson Combat SIG P320 extended slide release is uniquely shaped to improve your reloads u..
59.00€
Brand:
Wilson Combat
Product Code:
573
Machined from tough alloy billet steel for a lifetime of function and wear resistance, this disconnector has been engineered to provide flawless function, enable light trigger pulls and to reduce drag on the slide.
Works best with our Bullet Proof® Ultralight hammers and deluxe Bullet Proof® Sear (..
55.00€
Brand:
Wilson Combat
Product Code:
R33PS
These 1911 Auto parts meet or exceed factory specifications. If you're building a gun, or wish to bring your gun back to spec., these parts will provide exceptional service...
4.90€